"Awaiting bla bla"![]()
"Awaiting bla bla"![]()
i got the same thing with my homeserver. I can only connect via localip but others can connect normally. In ur startup after the " allowdupe and then the rest of the commands
Lke this
\CoD2MP_s.exe" allowdupe +set fs_game "test"
Dont work too
Unknown command "allowdupe"
Last edited by thOuMta; 23rd March 2013 at 17:46.
no one know how i can ?
Restart your box? I thought you said this was a home server? The word "box" normally denotes a dedicated box rented from a Game Server Provider. So, which is it? A home server or a rented dedicated box?
For the rented dedicated box, your provider should give you the IP. It should be all set up for you. If not, you need to contact them, and get them to give you the public IP.
If it is a home server, and you are connecting behind a router, you can get the public IP very easily: open your web browser, and go to:
http://whatismyipaddress.com/
That will give you the IP address that you should use in your server command line.
When i put '' +set net_ip xxxxxxx ''
Its make that:
xx.xx.xx.xx its my IP i just cache itCode:Winsock Initialized Opening IP socket: xx.xx.xx.xx:28960 WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL Opening IP socket: xx.xx.xx.xx:28961 WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL Opening IP socket: xx.xx.xx.xx:28962 WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL Opening IP socket: xx.xx.xx.xx:28963 WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL Opening IP socket: xx.xx.xx.xx:28964 WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL Opening IP socket: xx.xx.xx.xx:28965 WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL Opening IP socket: xx.xx.xx.xx:28966 WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL Opening IP socket: xx.xx.xx.xx:28967 WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL Opening IP socket: xx.xx.xx.xx:28968 WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL Opening IP socket: xx.xx.xx.xx:28969 WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL WARNING: Couldn't allocate IP port![]()
If you are on ADSL or ADSL2, you need to DMZ your router's UDP. Cable/Fibre tends to have this already done, but ADSL/ADSL2 doesn't do it as stock, so you need to set your router up accordingly. It's no good just forwarding/opening your ports. There is a good DMZ guide here:
http://kb.kerio.com/product/kerio-co...e-dmz-347.html
Last edited by Tally; 23rd March 2013 at 18:20.
I already configure the DMZ but its the same
Last edited by thOuMta; 23rd March 2013 at 18:23.