Install Nanny (bot)

Hi all,
Today i would like to install this awesome bot in my server starting from 0. Your help is indispensable.
So, starting from here https://github.com/voron00/Nanny/tree/cod2_english

Instructions to run in *nix:

Install through CPAN (http://www.cpan.org/modules/INSTALL.html) dependent modules: DBI, DBD::SQLite, LWP::Simple
Setup every necessary parameters in nanny.cfg
Launch in terminal. In *nix you can use nanny.sh

The first command to write in the terminal is this?

Code:

---

cpan App::cpanminus

---

There is a method to install it in a different folder? If yes, how?

Then for install the DBI, DBD::SQLite, LWP::Simple modules, i need to write this?

Code:

---

cpanm Module::DBI
cpanm Module::DBD::SQLite
cpanm Module::LWP::Simple

---

Also here, there is a method to install it in a different folder/? If yes, how?
Thanks.

PHP Code:

---

cpanm DBI
cpanm DBD::SQLite
cpanm LWP::Simple 


---

or just

PHP Code:

---

cpan DBI
cpan DBD::SQLite
cpan LWP::Simple 


---

(cpanminus is actually optional)

If you are root they will be installed to /usr/local/lib/perl, if not root, should be in your /home/per5 dir, you proably can change that paths but idk why you need to though.

Quote:

---

Originally Posted by voron00

PHP Code:

---

cpanm DBI
cpanm DBD::SQLite
cpanm LWP::Simple 


---

or just

PHP Code:

---

cpan DBI
cpan DBD::SQLite
cpan LWP::Simple 


---

(cpanminus is actually optional)

If you are root they will be installed to /usr/local/lib/perl, if not root, should be in your /home/per5 dir, you proably can change that paths but idk why you need to though.

---

If i install it on a ssd, i will get more performance or no?

I don't see any connection between ssd and perl modules lol, you proably shouldn't bother about that.

Quote:

---

Originally Posted by voron00

I don't see any connection between ssd and perl modules lol, you proably shouldn't bother about that.

---

Ok. So, i wrote :

Code:

---

cpan DBI

---

and this is the result :

Attachment 1286

:confused:

PHP Code:

---

sudo apt-get install make 


---

Quote:

---

Originally Posted by voron00

PHP Code:

---

sudo apt-get install make 


---

---

I write that, and then :

Code:

---

cpan DBI

---

Attachment 1287

Quote:

---

Originally Posted by sttte93

I write that, and then :

Code:

---

cpan DBI

---

Attachment 1287

---

Ok. Maybe the answer was:

Code:

---

sudo cpan DBI

---

Ok, seems running :) Thank you voron00.
PS: where i can find geoip [!locate command] updated? :)

http://dev.maxmind.com/geoip/legacy/geolite/ (http://geolite.maxmind.com/download/...iteCity.dat.gz)

Just replace GeoLiteCity.dat with the newest one

Quote:

---

Originally Posted by voron00

http://dev.maxmind.com/geoip/legacy/geolite/ (http://geolite.maxmind.com/download/...iteCity.dat.gz)

Just replace GeoLiteCity.dat with the newest one

---

Thank you.

When a player type !help for the help commands, console write his commands on public chat. How can i set to private? :confused:

IIRC you need to find the position which says say $msg and replace it with tell $playerid $msg... and hack that into Perl code ^^

Edit:

I checked the source now, this seems to be it: https://github.com/voron00/Nanny/blo...nanny.pl#L2749

Try to replace this:

PHP Code:

---

&rcon_command("say $name^7: Âû ìîæåòå èñïîëüçîâàòü ^1!stats ^7÷òîáû óçíàòü ñâîþ ïîäðîáíóþ ñòàòèñòèêó"); 


---

With:

PHP Code:

---

&rcon_command("tell $slot $name^7: Âû ìîæåòå èñïîëüçîâàòü ^1!stats ^7÷òîáû óçíàòü ñâîþ ïîäðîáíóþ ñòàòèñòèêó"); 


---

But since the !say $name scheme is like over 20 times there, you gotta replace it in every line.

I wouldn't recommend doing that because nanny is 100% sinchoronous and will not respond to anyone else until she finishes that help command (unless you feel like a boss and will implent threads lol)

Ok, thank you.
I have another problem with nanny. It's about guids. I have an original Guid for cod2 but, sometimes (random) when a map changes, my guid becomes 0.
I already set, in the nanny.cfg, guid_sanity_check = yes and restarted, many times, the server. It's affect also other players with original guid, not only me. And is a cracked server. :confused:
Any suggestions?

Just reconnect, or use your ip as auth.

masterserver doing the derpy dance again.

Quote:

---

Originally Posted by voron00

Just reconnect, or use your ip as auth.

---

Ok thanks. What can i do with !stats if i have guid problems with players?

PHP Code:

---

root@administrator:~/cod2/cod13/Nanny# ./nanny.sh
Can't locate Rcon/KKrcon.pm in @INC (you may need to install the Rcon::KKrcon module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.26.1 /usr/local/share/perl/5.26.1 /usr/lib/x86_64-linux-gnu/perl5/5.26 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.26 /usr/share/perl/5.26 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base) at nanny.pl line 63.
BEGIN failed--compilation aborted at nanny.pl line 63 (#1)
    (F) You said to do (or require, or use) a file that couldn't be found.
    Perl looks for the file in all the locations mentioned in @INC, unless
    the file name included the full path to the file.  Perhaps you need
    to set the PERL5LIB or PERL5OPT environment variable to say where the
    extra library is, or maybe the script needs to add the library name
    to @INC.  Or maybe you just misspelled the name of the file.  See
    "require" in perlfunc and lib.

Uncaught exception from user code:
        Can't locate Rcon/KKrcon.pm in @INC (you may need to install the Rcon::KKrcon module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.26.1 /usr/local/share/perl/5.26.1 /usr/lib/x86_64-linux-gnu/perl5/5.26 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.26 /usr/share/perl/5.26 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base) at nanny.pl line 63.
        BEGIN failed--compilation aborted at nanny.pl line 63. 


---

Quote:

---

Originally Posted by bulent

PHP Code:

---

root@administrator:~/cod2/cod13/Nanny# ./nanny.sh
Can't locate Rcon/KKrcon.pm in @INC ([B]you may need to install the Rcon::KKrcon module[/B]) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.26.1 /usr/local/share/perl/5.26.1 /usr/lib/x86_64-linux-gnu/perl5/5.26 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.26 /usr/share/perl/5.26 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base) at nanny.pl line 63.
BEGIN failed--compilation aborted at nanny.pl line 63 (#1)
    (F) You said to do (or require, or use) a file that couldn't be found.
    Perl looks for the file in all the locations mentioned in @INC, unless
    the file name included the full path to the file.  Perhaps you need
    to set the PERL5LIB or PERL5OPT environment variable to say where the
    extra library is, or maybe the script needs to add the library name
    to @INC.  Or maybe you just misspelled the name of the file.  See
    "require" in perlfunc and lib.

Uncaught exception from user code:
        Can't locate Rcon/KKrcon.pm in @INC ([B]you may need to install the Rcon::KKrcon module[/B]) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.26.1 /usr/local/share/perl/5.26.1 /usr/lib/x86_64-linux-gnu/perl5/5.26 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.26 /usr/share/perl/5.26 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base) at nanny.pl line 63.
        BEGIN failed--compilation aborted at nanny.pl line 63. 


---

---

Have you installed the KKrcon module? http://kkrcon.sourceforge.net/

Quote:

---

Originally Posted by CaptainSlow

Have you installed the KKrcon module? http://kkrcon.sourceforge.net/

---

Hi buddy,

i have the same problem on my second server. The only thing that differentiates these two cases is the OS used on my server number 1 under ubuntu 16.04 I had no problem nanny run well but on my second under ubuntu 18.04 with the same installation method I have this problem.

Attachment 1617

If you have a solution or need more information dont hesitate.