Script mill

Hey guys,

I've have a script here to make a mill rotate. This works good but i want to change the script a little bit. So when you activate the trigger, the mill should stop rotating after e.g 1min, so you have to reactivate the trigger.
Could anyone help me here?

Code:

---

molen()
{
  trig = getent("trigger_windmolen", "targetname");
 
  while(1)
      {
        trig waittill ("trigger",user);
        rotate_obj = getentarray("windmolen","targetname");
        if(isdefined(rotate_obj))
            {
              for(i=0;i<rotate_obj.size;i++)
                  {
                    rotate_obj[i] thread ra_rotate();
                  }
            }
      }
}

ra_rotate()
{
  if (!isdefined(self.speed))
  self.speed = 5;
  if (!isdefined(self.script_noteworthy))
  self.script_noteworthy = "x";

  while(true)
      {
        // rotateYaw(float rot, float time, <float acceleration_time>, <float deceleration_time>);
        if (self.script_noteworthy == "y")
        self rotateYaw(360,self.speed);
        else if (self.script_noteworthy == "x")
        self rotateRoll(360,self.speed);
        else if (self.script_noteworthy == "z")
        self rotatePitch(360,self.speed);
        wait ((self.speed)-0.1); // removes the slight hesitation that waittill("rotatedone"); gives.
        //self waittill("rotatedone");
       
      }
}

---

Thanks!
Henny

Code:

---

molen()
{
  trig = getent("trigger_windmolen", "targetname");
 
  while(1)
      {
        trig waittill ("trigger",user);
        rotate_obj = getentarray("windmolen","targetname");
        if(isdefined(rotate_obj))
            {
              for(i=0;i<rotate_obj.size;i++)
                  {
                    rotate_obj[i] thread ra_rotate();
                    rotate_obj[i] thread resetTimer();
                  }
            }
      }
}

ra_rotate()
{
  self endon("rotate_stop");
  if (!isdefined(self.speed))
  self.speed = 5;
  if (!isdefined(self.script_noteworthy))
  self.script_noteworthy = "x";

  while(true)
      {
        // rotateYaw(float rot, float time, <float acceleration_time>, <float deceleration_time>);
        if (self.script_noteworthy == "y")
        self rotateYaw(360,self.speed);
        else if (self.script_noteworthy == "x")
        self rotateRoll(360,self.speed);
        else if (self.script_noteworthy == "z")
        self rotatePitch(360,self.speed);
        wait ((self.speed)-0.1); // removes the slight hesitation that waittill("rotatedone"); gives.
        //self waittill("rotatedone");
       
      }
}

resetTimer()
{
  self endon("rotate_stop");
  time = 60;
  while(time > 0)
  {
      wait 1;
      time = (time-1);
  }
  self notify("rotate_stop");
}

---

Untested, and probably not the best way of doing it, but should work.

Thank you very mucht! It works excellent :)